Product catalogue

Gsp210/250 Core Trimmer & Cut Off Machine Supplied with Coolant Pump Unit

This unit, designed for use in Rock Mechanics, can also be used in mineralogy, ceramics and refractory sample preparation. Cores in excess of 140 mm length and cubes up to 100 mm s

Cooling/circulation pump for 70-0251/01

Cooling/circulation pump for 70-0251/13

60 Hz version of cooling pump for 70-0251/06

Core Trimmer and Cut Off Machine 230V, 50 Hz, 1 ph

The core trimmer and cut-off machine is used for obtaining rock samples perfectly machined (cubes, prisms etc) from irregular rock or core pieces. 70-0251/01 is supplied complete

Core Trimmer and Cut Off Machine 230V, 60 Hz, 1 ph

The core trimmer and cut-off machine is used for obtaining rock samples perfectly machined (cubes, prisms etc) from irregular rock or core pieces. 70-0251/06 is supplied complete

Diamond abrasive cutting blade for 70-0251/01

Double faced cup wheel for 70-0251/01

Double faced cup wheel 200 mm diameter x 16 mm thick for 70-0251/01

Gsp210/250 Core Trimmer & Cut Off Machine Supplied with Coolant Pump Unit

This unit, designed for use in Rock Mechanics, can also be used in mineralogy, ceramics and refractory sample preparation. Cores in excess of 140 mm length and cubes up to 100 mm s

HQ size Core Drill Bit for 70-0095/01 Rock Core Drill

Hole (outside) diameter: 96 mm Core (inside) diameter: 63.5 mm

Rock Core Drill Supplied with 2 x NX Core Drill Bits

Cores may be cut from regular or irregular samples of rock or other material for end preparation prior to strength testing. Side guards and a drain tray provide protection against

Slake Durability Apparatus

This equipment has been developed to assess the durability of rock to weakening and disintegration when subjected to the simulated effects of climatic slaking. The rock samples ar

ELE-Hoek Cell NX 54.74 mm Diameter

• For use with pressures up to 70 mPa • Fast and effective specimen handling • Accessories for permeability testing The ELE-Hoek cells in this section have been designed to accept

Spare Jacket Nx Size.

55 mm jacket

Specimen Extruder Bench Mounting Frame for Extruding Specimens From Hoek Cells

Extrudes the specimen from its jacket without the need to drain the confining fluid. Incorporates a rack and pinion mechanism mounted in a steel body, with adjustable back plate. S

ELE-Hoek Cell ADR Touch 2000 Compression Machine

• High stability load frame • Calibration accuracy satisfies BS EN ISO 7500-1, ASTM E4 This machine incorporates the ADR Touch Microprocessor System. The ADR is designed to minimi

Hand Operated Pressure System with Pressure Gauge & Flexible Hose

Nylon Tubing 6 mm OD x 4 mm ID 3500 Kpa

6 mm outside diameter x 4 mm inside diameter. For use up to a pressure of 3500 kPa. Priced per metre.

Pair of Permeability End Caps NX supplied with Distance Block

Permeability end caps used with ELE-Hoek Cells and constant pressure systems are a cost-effective solution suited to investigating the permeability of rock at high confining pressu

Pressure Test 3500 Oil/Water Constant Pressure System with Digital Pressure Gauge

• Sealed oil reservoir • Continuous constant pressure control The ELE oil/water constant pressure system provides continuous variable pressure. The machine features a clear hydraul