Products
Product catalogue
671 products from seven leading manufacturers. Filter by solution, brand, type or technology.
Proceq GS8000
Discover our most advanced GPR for utility mapping, subsurface detection and underground visualisation. Damage prevention / Excavation safety / Utility locating & mapping / Subsur
Proceq GS8000 Pro
Discover our most advanced GPR for utility mapping, subsurface detection and underground visualisation. Damage prevention / Excavation safety / Utility locating & mapping / Subsur
Proceq GS8000 Lite
The most efficient real-time workflow and technology to locate and mark subsurface utilities in rough terrains. Locate & mark / Damage prevention / Excavation safety / Utility loc
Proceq GS9000
Discover the most efficient multichannel GPR system with real-time 3D visualization Damage prevention / Excavation safety / Utility locating & mapping / Subsurface utility enginee
BS Block Platens & Platen Handling Assembly for 2000kN & 3000kN BS Frames.
The Platen Handling Assemblies shall be supplied with El37-4860 BS/EN specification rectangular platen extended length safety gates and roller assemblies for the platens. Suitable
BS/EN Standard Rectangular Platen
Manufactured to the requirements of BS 6073-1 and EN 772-1 these platens, measuring 445 x 250 x 75 mm thick, are suitable for testing a wide range of samples. The upper platen is c
Extended Front Safety Gate for Use with 2000kN BS/EN Load Frames Fitted with Rectangular Platens.
For use with 2000 kN capacity machines fitted with rectangular platens.
Sub-Platen Assembly for 150mm Dia Specimens for Split Cylinder Testing to BS1881 / EN12390-6
For testing cylinders of 150 x 150 mm and 150 x 300 mm (diameter x length).
Specimen Bearers for Testing Kerbs. Used on 37-6140 Flags Frame.
For transverse testing of kerbs to EN 1340.
BS 1881 Specimen Bearer Assembly 38mm Dia X 160mm Length.
Comprising 2 self-aligning upper bearers, 1 self-aligning and 1 fixed lower bearer. Roller bearers are 38 mm diameter x 160 mm long. Suitable for 3- or 4-point flexural testing of
Extensibility of Mould Apparatus BS
Conforms to BS 6463. The unit comprises a metal sleeve with a hook and set screw to fit over one of the mould pointers, and a clamp to fit onto the other pointer of the mould. Supp
Buoyancy Balance 6 kg X 0.1 g supplied with Support Frame Water Tank & Suspension Hook
The buoyancy balance system developed by ELE consists of a rigid support frame, incorporating a water tank mounted on a platform. A mechanical lifting device is used to raise the w
Wire Basket Brass with Handle Nominal 6000Cm³ Capacity with 1.7mm Wire Mesh.
Relative Density 200 mm diameter x 190 mm deep, 1.70 mm wire mesh. Complies to EN 1097-6, EN 12697-6, BS 812, ASTM C127, AASHTO T85
Sand Absorption Cone
Made of brass to the dimensions given in BS 812, ASTM C128 and AASHTO T84.
Tamping Rod
For use with cone. Tamping face is 25mm diameter and complies with BS 812, ASTM C128 and AASHTO T84.
Measuring Cylinder - Glass 100 ml
Soda glass, spouted, BS EN 4788.
Measuring Cylinder - Glass 1000 ml
Soda glass, spouted, BS EN 4788.
Measuring Cylinder - Glass 250 ml
Soda glass, spouted, BS EN 4788.
Measuring Cylinder - Glass 500 ml
Soda glass, spouted, BS EN 4788.
Measuring Cylinder - Plastic 100 ml
Plastic with spout, graduated to BS 5404.
Measuring Cylinder - Plastic 1000 ml
Plastic with spout, graduated to BS 5404.
Measuring Cylinder - Plastic 250 ml
Plastic with spout, graduated to BS 5404.
Measuring Cylinder - Plastic 500 ml
Plastic with spout, graduated to BS 5404.